研究業績

2024年

Tatsumu Mitsuhashi, Toshiki Kanamoto, Koutaro Hachiya, and Atsushi Kurokawa, "Transmitting coil for uniform magnetic flux density," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.68-73, Mar. 2024.

Kotaro Terada, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "Optimal inner diameter of single-layer planar spiral coils," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.155-159, Mar. 2024.

Tomoya Akasaka, Ichirota Takazawa, Seria Kasai, Atsushi Kurokawa, and Toshiki Kanamoto, "RESURF: Structure optimization of SiC trench MOSFET using machine learning," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.144-149, Mar. 2024.

Seria Kasai, Yamato Ishida, Fumiya Sano, Tomoya Akasaka, Masami Fukushima, Koichi Kitagishi, Seijin Nakayama, Hideki Ishihara, Masashi Imai, Atsushi Kurokawa, and Toshiki Kanamoto, "Energy reduction of health monitoring processor by optimizing supply and back-gate voltages with simulated annealing," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.227-232, Mar. 2024.

本田悟, 石田大和, 佐野文也, 葛西瀬梨亜, 松村哲哉, 高澤一朗太, 金本俊幾,"EMCを考慮したプロセッサ実装基板の設計に関する研究," 情報処理学会東北支部研究報告, Vol.2023-7, No.1-4, Feb. 2023.

2023年

Kai Sato, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "Compensation capacitance tunings of wireless power transfer systems using artificial neural network," IEICE Communications Express, vol.12, no.1, pp.1-4, Dec. 2023.

Fumiya Sano, Kouki Fukuda, Shinji Kubo, Sumio Tanba, Yamato Ishida, Atsushi Kurokawa, and Toshiki Kanamoto, "LoRa Based Wireless Sensor Network for Bus Tracking System in Contoured Castle Town," 2023 IEEE 12th Global Conference on Consumer Electronics (GCCE), Nara, Japan, pp. 891-892, Oct. 2023.

Mai Yamaguchi, Mai Yamakawa, Seiji Mochizuki, Kousuke Imamura, Toshiki Kanamoto and Tetsuya Matsumura, "Ultra-Low-Latency Video Coding with Reduced Frame Memory Structure for 4K/8K High-Resolution Video," 2023 IEEE 12th Global Conference on Consumer Electronics (GCCE), Nara, Japan, pp. 852-853, Oct. 2023.

石田大和, 佐野文也, 葛西瀬梨亜, 神谷浩, 松村哲哉, 今村幸祐, 金本俊幾, "LSIの放射性エミッションノイズモデリングに向けたTEG設計," DAシンポジウム2023, pp.180-186, Sep. 2023

葛西瀬梨亜,石田大和,金本俊幾,"世界自然遺産に設置するための気象・地象・生態系センサノードの 開発," 弘前大学白神研究会研究報告会, pp.1-1, April 2023.

鈴木駿輔,金本俊幾,"LoRaにおける通信条件," 情報処理学会東北支部研究報告, Vol.2022-7, No.5-3, Feb. 2023.

上野颯太,金本俊幾,"UAVの消費エネルギー低減に向けた評価," 情報処理学会東北支部研究報告, Vol.2022-7, No.5-4, Feb. 2023.

石田大和,宗形恒夫,松村哲哉,金本俊幾,"オンチップデカップリング容量の最適化と評価方法の提 案," 情報処理学会東北支部研究報告, Vol.2022-7, No.5-5, Feb. 2023.

工藤歩華,宗形恒夫,金本俊幾,"トレンチ型SiC-MOSFETの素子構造推定," 情報処理学会東北支部研究報告, Vol.2022-8, No.5-6, Feb. 2023.

Kyosuke Kusumi, Koutaro Hachiya, Ryotaro Kudo, Toshiki Kanamoto, Atsushi Kurokawa, Electronic component placement optimization for heat measures of smartglasses, IEICE Electronics Express, Article ID 20.20230011, Advance online publication February 20, 2023, Online ISSN 1349-2543, https://doi.org/10.1587/elex.20.20230011,https://www.jstage.jst.go.jp/article/elex/advpub/0/advpub_20.20230011/_article/-char/en

Kai Sato, Toshiki Kanamoto, Ryotaro Kudo, Koutaro Hachiya, Atsushi Kurokawa, Bayesian Neural Network Based Inductance Calculations of Wireless Power Transfer Systems, IEICE Electronics Express, Article ID 20.20230030, Advance online publication February 06, 2023, Online ISSN 1349-2543, https://doi.org/10.1587/elex.20.20230030,https://www.jstage.jst.go.jp/article/elex/advpub/0/advpub_20.20230030/_article/-char/en

Taisei Arima, Shigeru Hidaka, Ryosuke Watanabe, Tomoya Akasaka, Atsushi Kurokawa, and Toshiki Kanamoto, "A thermally optimizing method of thin film resistor trimming with machine learning," IEICE Electronics Express, vol.20, no.5, pp.1-5, Mar. 2023.

Ryotaro Kudo, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "A parabolic spiral coil transmitter with uniform magnetic field for smart devices," IEICE Electronics Express, vol.20, no.1, pp.1-5, Jan. 2023.

2022年

Ryotaro Kudo, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "A bernoulli spiral coil transmitter for charging various small electronic devices," IEICE Electronics Express, vol.19, no.23, pp.1-6, Dec. 2022.

Kyosuke Kusumi, Koutaro Hachiya, Ryotaro Kudo, Toshiki Kanamoto, and Atsushi Kurokawa, "Electronic component placement optimization for heat measures of smartglasses," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.72-76, Oct. 2022.

Issei Sato, Ryotaro Kudo, Toshiki Kanamoto, Koutaro Hachiya, Shinsuke Kashiwazaki, and Atsushi Kurokawa, "Heating of foreign object in inductive wireless charging" Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.91-95, Oct. 2022.

Tomoya Akasaka, Shigeru Hidaka, Ryosuke Watanabe, Taisei Arima, Atsushi Kurokawa, and Toshiki Kanamoto, "A thermally optimizing method of thin film resistor trimming with machine learning," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.157-162, Oct. 2022.

Ryotaro Kudo, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "A parabolic spiral coil transmitter for charging multiple receivers," Proc. of the IEEE Global Conference on Consumer Electronics (GCCE), pp.229-230, Oct. 2022.

Kai Sato, Toshiki Kanamoto, Ryotaro Kudo, Koutaro Hachiya, and Atsushi Kurokawa, "Deep neural network based inductance calculations of wireless power transfer systems," Proc. of the IEEE Global Conference on Consumer Electronics (GCCE), pp.227-228, Oct. 2022.

岡巧, 葛西瀬梨亜, 石田大和, 佐野文也, 今井雅, 金本俊幾, "パターン密度均一化に貢献するオンチップデカップリング容量セルの提案," DAシンポジウム2022, pp.207-211, Sep., 2022

Ryosuke Watanabe, Shigeru Hidaka, Tomoya Akasaka, Shota Kajiya, Taisei Arima, Atsushi Kurokawa, and Toshiki Kanamoto, "Enhanced laser trimming of thin film resistors dedicated to snubber for high power IGBT modules," Proc. of the IEEE International Midwest Symposium on Circuits and Systems (MWCAS), Aug. 2022.

工藤遼太朗, 金本俊幾, 黒川敦, "複数装置を充電可能な放物螺旋コイルの送電機," 電気学会 全国大会 講演論文集, p.4-068, 2022年3月.

柏崎晋助, 金本俊幾, 黒川敦, "リング状容量性カプラを用いた電力伝送システムの特性解析," 電気学会 全国大会 講演論文集, p.4-081, 2022年3月.

佐藤一世, 金本俊幾, 黒川敦, "磁界結合型ワイヤレス電力伝送システムにおける異物の発熱," 電気学会 全国大会 講演論文集, p.4-087, 2022年3月.

武田朋弥,丹波澄雄,藤崎和弘,金本俊幾,"ドローンの動作最適化による消費エネルギーの低減," 情報処理学会東北支部研究報告, Vol.2021-6, No.5-1, Feb., 2022.

赤坂知哉,梶谷翔太,渡邊良祐,有馬大生,金本俊幾,"薄膜抵抗器のトリミング形状に対する機械学習 を用いた熱的最適化," 情報処理学会東北支部研究報告, Vol.2021-6, No.5-2, Feb., 2022.

葛西瀬梨亜,畠山寛,今井雅,黒川敦,金本俊幾,"低消費エネルギープロセッサのSoC物理設計," 情報処理学会東北支部研究報告, Vol.2021-6, No.5-3, Feb., 2022.

佐野文也,金本俊幾,"オンチップインピーダンスのモデリング," 情報処理学会東北支部研究報告, Vol.2021-6, No.5-4, Feb., 2022.

Shinsuke Kashiwazaki, Koutaro Hachiya, Toshiki Kanamoto, Ryosuke Watanabe, and Atsushi Kurokawa, "Receiver coil built into belt for heat dissipation of watch-type smart devices," IEICE Electronics Express, vol.19, no.3, pp.1-5, Feb. 2022.

2021年

Ryotaro Kudo, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "Planar single-coil transmitters for efficiently charging smart devices of various receiving coil sizes," Proc. of the International Conference on Emerging Technologies for Communications(ICETC), pp.1-5, Dec. 2021.

Toshiki Kanamoto, Kan Hatakeyama, Seria Kasai, Masashi Imai, Atsushi Kurokawa, Masami Fukushima, Koichi Kitagishi, Seijin Nakayama, Hideki Ishihara, "An Energy Efficient Processor Applicable to Continuous SPO2 Monitoring," Proc. of the IEEE Global Conference on Consumer Electronics (GCCE), pp.1-2, Oct. 2021.

Kodai Matsuhashi, Koutaro Hachiya, Toshiki Kanamoto, Masashi Imai, and Atsushi Kurokawa, "Thermal design technology for non-low power hearables," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.104-109, Mar. 2021.

Shinsuke Kashiwazaki, Kodai Matsuhashi, Motoki Ishizaki, Toshiki Kanamoto, Koutaro Hachiya, Ryosuke Watanabe, and Atsushi Kurokawa, "Using receiver coils for dissipating heat of watch-type smart devices," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.162-167, Mar. 2021.

Kan Hatakeyama, Masami Fukushima, Koichi Kitagishi, Seijin Nakayama, Hideki Ishihara, Masashi Imai, Atsushi Kurokawa, and Toshiki Kanamoto, "Energy efficient RISC-V processor for portable sensor applications," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.181-184, Mar. 2021.

Ryosuke Watanabe, Keita Izawa, Shota Kajiya, Tomohiro Aoba, Ryo Arima, Atsushi Kurokawa, and Toshiki Kanamoto, "Thermally optimization of the trimming shape of thin film NiCr resistors to improve pulse durability," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.219-224, Mar. 2021.

金本俊幾,"パワーモジュールの信頼性向上に向けたデバイスの電気・熱・応力解析," 第13回JEITA LPBフォーラム, http://jeita-sdtc.com/2021/01/lpbforum13web, March 5, 2021. (招待講演)

Kodai Matsuhashi, Koutaro Hachiya, Toshiki Kanamoto, Shinsuke Kashiwazaki, Kyosuke Kusumi, Atsushi Kurokawa, "Effective methods to promote heat dissipation of wrist wearables," IEICE Electronics Express, 2021, Volume 18, Issue 5, Pages 20210017, Released March 10, 2021.

有馬大生,宗形恒夫,黒川敦,今井雅,金本俊幾, "データシートを用いたトレンチ型IGBTの素子構造推定," 情報処理学会東北支部研究報告, Vol.2020-6, No.1-1, Feb., 2020.

有馬諒,梶谷翔太,伊澤敬太,渡邊良祐,青葉智寛,黒川敦,今井雅,金本俊幾, "耐パルス性NiCr薄膜抵抗器のトリミング形状に対する熱的最適化," 情報処理学会東北支部研究報告, Vol.2020-6, No.1-2, Feb., 2021.

及川大樹,野村哲哉,丹波澄雄,黒川敦,今井雅,金本俊幾, "TOFカメラを用いた魚体重推定," 情報処理学会東北支部研究報告, Vol.2020-6, No.1-3, Feb., 2021.

岡巧,黒川敦,今井雅,金本俊幾, "LSI•パッケージ•ボード協調設計に向けたオンチップインピーダンス抽出," 情報処理学会東北支部研究報告, Vol.2020-6, No.1-4, Feb., 2021.

松橋功大,今井雅,金本俊幾,黒川敦, "ヒアラブルデバイスの熱回路モデルと解析," 情報処理学会東北支部研究報告, Vol.2020-6, No.2-1, Feb., 2021.

Yang. Peng, Tomoyuki. Nagase, Toshiki. Kanamoto, Tsutomu. Zeniya and Shan. You, "A Virtual Optical Holographic Encryption System Using Expanded Diffie-Hellman Algorithm," in IEEE Access, vol. 9, pp. 22071-22077, 2021.

2020年

Yang Peng, Tomoyuki Nagase, Shan You, and Toshiki Kanamoto,"A VOHE System for Underwater Communications." Electronics 9.10: 1557, Sep. 2020.

Yang Peng, Tomoyuki Nagase and Toshiki Kanamoto, "An Optical Encryption Digital Holographic System Based on RSA Algorithm," INFORMATION Vol.23, No.2, pp.139-148, June, 2020.

Toshiki Kanamoto, Koki Kasai, Kan Hatakeyama, Atsushi Kurokawa, Tomoyuki Nagase, and Masashi Imai, "A simple yet precise capacitance estimation method for on-chip power delivery network towards EMC analysis," IEICE Electronics Express, Article ID 17.20200198, [Advance publication] Released June 30, 2020.

Ryosuke Watanabe, Keita Izawa, Shota Kajiya, Daiki Tsunemoto, Koki Kasai, Atsushi Kurokawa, and Toshiki Kanamoto, "Effective thermal modeling of a thin film snubber resistor for power modules," Nonlinear Theory and Its Applications, IEICE, vol.E11-N, no.2, pp.253-266, Apr. 2020.

佐藤裕之, 金本俊幾 他, "弘前大学レクチャーコレクション," 弘前大学出版会, 307p, March 2020, ISBN 9784907192860.

Kodai Matsuhashi, Toshiki Kanamoto, and Atsushi Kurokawa, "Thermal model and countermeasures for future smart glasses," Sensors, vol.20, no.5, 1446, pp.1-20, Mar. 2020.

葛西孝己,今井 雅, 黒川 敦, 金本 俊幾, "シミュレーションベースオンチップ電源容量抽出手法," 情報処理学会東北支部研究報告, Vol.2019-6, No.1-1, Feb., 2020.

常本大貴、梶谷翔太、伊澤敬汰、渡邊良祐、 葛西孝己、黒川敦、金本俊幾, "パワーフィルム抵抗器のパルス破壊解析に向けた熱回路モデルの検討," 情報処理学会東北支部研究報告, Vol.2019-6, No.1-2, Feb., 2020.

梶谷翔太、伊澤敬汰、常本大貴、葛西孝己、 黒川敦、金本俊幾、渡邊良祐, "耐パルス性薄膜抵抗器の有限要素法構造モデルの作成," 情報処理学会東北支部研究報告, Vol.2019-6, No.1-3, Feb., 2020.

伊藤颯汰、宗形恒夫、黒川敦、今井雅、 金本俊幾, "パワーモジュールの熱応力連成解析に向けたIGBT等価回路モデルの検討," 情報処理学会東北支部研究報告, Vol.2019-6, No.2-1, Feb., 2020.

畠山寛、丹波澄雄、黒川敦、今井雅、金本俊幾, "LPWA通信規格LoRaを用いたセンサノードの低消費電力通信の評価," 情報処理学会東北支部研究報告, Vol.2019-6, No.2-2, Feb., 2020.

畑瀬拓実、黒川敦、今井雅、金本俊幾, "メンテナンスフリーセンサーノード実現に向けた画像分析と消費電力低減の検討," 情報処理学会東北支部研究報告, Vol.2019-6, No.2-3, Feb., 2020.

Yuuta Satomi, Koutaro Hachiya, Toshiki Kanamoto, Ryosuke Watanabe, and Atsushi Kurokawa, "Thermal placement on PCB of components including 3D ICs," IEICE Electronics Express, vol.17, no.3, p.20190737, Feb. 2020.

2019年

Kodai Matsuhashi, Toshiki Kanamoto, and Atsushi Kurokawa, "Thermal resistance model and analysis for future smart glasses," Proc. of the International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), pp.1-4, Oct. 2019.

Kodai Matsuhashi, Koutaro Hachiya, Toshiki Kanamoto, Masashi Imai, and Atsushi Kurokawa, "Thermal modeling and simulation of a smart wrist-worn wearable device," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.138-143, Oct. 2019.

Koki Kasai, Atsushi Kurokawa, Masashi Imai, and Toshiki Kanamoto, "Efficiency investigation of capacitors mounted on re-distribution layers for FOWLP," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.176-179, Oct. 2019. [Outstanding Paper Award]

Kyota Akimoto, Toshiki Kanamoto, Atsushi Kurokawa, and Masashi Imai, "Quantitative performance comparison of asynchronous and synchronous comparator," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), 296-297, Oct. 2019.

Ryosuke Watanabe, Keita Izawa, Shota Kajiya, Taiki Tsunemoto, Koki Kasai, Atsushi Kurokawa, and Toshiki Kanamoto, "An efficient thermal model of thin film NiCr resistors considering pulse response," Proc. of the Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), pp.164-167, Oct. 2019.

金本俊 幾, "パ ワーデバイスの寿命予測に向けたPowerVoltの活用," JEDAT Solution Seminar 2019, 京都, Sep. 13, 2019.(招待講演)

金本俊 幾, "パ ワーデバイスの寿命予測に向けたPowerVoltの活用," JEDAT Solution Seminar 2019, 東京, Sep. 11, 2019.(招待講演)

T. Kanamoto et al., "A Single-Stage RISC-V Processor to Mitigate the Von Neumann Bottleneck," 2019 IEEE 62nd International Midwest Symposium on Circuits and Systems (MWSCAS), Dallas, TX, USA, 2019, pp. 1085-1088.

Koutaro Inaba, Tomohiro Yoneda, Toshiki Kanamoto, Atsushi Kurokawa and Masashi Imai, "Hardware Trojan Insertion and Detection in Asynchronous Circuits," Proc. ASYNC2019, pp.134-143, May, 2019

Ryosuke Kasai, Koutaro Hachiya, Toshiki Kanamoto, Masashi Imai, and Atsushi Kurokawa, "Neural network-based 3D IC interconnect capacitance extraction," Proc. ICCET2019, pp.168-172, Apr., 2019

J. Chen, H. Kando, T. Kanamoto, C. Zhuo and M. Hashimoto, "A Multi-Core Chip Load Model for PDN Analysis Considering Voltage-Current-Timing Interdependency and Operation Mode Transitions," in IEEE Transactions on Components, Packaging and Manufacturing Technology, pp.1-10, 2019.

岡本慎太郎, 松橋功大, 今井雅, 金本俊幾, 黒川敦, "リストウェアラブルデバイスのベルト放熱効果," 電気学会 全国大会 講演論文集, p.32, March, 2019

赤坂親一郎, 金本俊幾, 黒川敦, 今井雅, "遅延ばらつきを考慮した遅延線設計による束データ方式非同期式回路の高性能化," 情報処理学会東北支部研究報告, Vol.2018-9, No.B4-1, Feb., 2019

和島純也, 金本俊幾, 黒川敦, 今井雅, "ハードウェアトロイ無効化のための多重化システムの実装," 情報処理学会東北支部研究報告, Vol.2018-9, No.B4-2, Feb., 2019

稲葉光太郎, 金本俊幾, 黒川敦, 今井雅, "束データ方式非同期式回路におけるハードウェアトロイ検出手法の評価," 情報処理学会東北支部研究報告, Vol.2018-9, No.B4-3, Feb., 2019

葛西孝己,黒川 敦, 今井 雅, 金本 俊幾, "AC解析を用いたオンチップ電源分配網の容量抽出手法," 情報処理学会東北支部研究報告, Vol.2018-9, No.B4-4, Feb., 2019

(報道) 東奥日報 2019年3月5日(火)

(報道) 陸奥新報 2019年2月24日(日)

2018年

稲葉光太郎, 金本俊幾, 黒川敦, 今井雅, "束データ方式非同期式回路におけるハードウェアトロイ攻撃と対策," 電子情報通信学会ハードウェアセキュリティフォーラム 2018, Poster Session, Dec., 2018

Yuuta Satomi, Koutaro Hachiya, Toshiki Kanamoto, and Atsushi Kurokawa, "Optimization of full-chip power distribution networks in 3D ICs," Proc. of the International Conference on Integrated Circuits and Microsystems (ICICM), pp.134-138, Nov. 2018,

Toshiki Kanamoto, Kazuaki Nomiya, Koki Kasai, Atsushi Kurokawa, Masashi Imai, Tsuneo Munakata, "Variability in Thermo-mechanical Stress Applied to the Bonding Junction of Power MOSFET," 11th ACM/IEEE Workshop on Variability Modeling and Characterization (VMC), pp1-2, Nov. 2018.

金本俊幾, 葛西孝己, 今井雅, 黒川敦, 橋本昌宜, 陳俊, 神藤始, "FOWLPを⽤いたLSIにおける再配線層上キャパシタおよびオンチップ容量の最適化," DAシンポジウム2018論文集, pp.88-92, Aug., 2018,

赤坂親一郎, 金本俊幾, 黒川敦, 今井雅, "2phaseハンドシェイクプロトコルに基づく束データ方式非同期式回路のレプリカ遅延線設計," DAシンポジウム2018論文集, pp.93-98, Aug. 2018

Kazuyuki Sakata, Takashi Hasegawa, Kouji Ichikawa, Toshiki Kanamoto, "Impact of mutual inductance on timing in nano-scale SoC," IEICE Electronics Express, Released June 10, 2018, May 16, 2018, Online ISSN 1349-2543, Print ISSN , https://doi.org/10.1587/elex.15.20180376,

J. Chen, T. Kanamoto, H. Kando, M. Hashimoto, "An On-Chip Load Model for Off-Chip PDN Analysis Considering Interdependency Between Supply Voltage, Current Profile and Clock Latency," 2018 IEEE 22th Workshop on Signal and Power Integrity (SPI), May 2018, pp. 1-4.

Kazuyuki Sakata, Takashi Hasegawa, kouji Ichikawa, Toshiki Kanamoto, "Prediction of the impact of Mutual Inductance on Timing Towards Nano-scale SoC," The 21st Workshop on Synthesis And System Integration of Mixed Information technologies, R1-8, pp.1-3, March 26th, 2018.

Yuuta Satomi, Koutaro Hachiya, Masashi Imai, Toshiki Kanamoto, Kaoru Furumi, Atsushi Kurokawa, "Power Delivery Network Optimization of 3D ICs Using Multi-Objective Genetic Algorithm," The 21st Workshop on Synthesis And System Integration of Mixed Information technologies, R2-10, pp.1-6, March 26th, 2018.

Kaoru Furumi, Shintaro Okamoto, Toshiki Kanamoto, Masashi Imai, Atsushi Kurokawa, "Impact of Distributing 3D Stacked ICs on Maximum Temperature Reduction," The 21st Workshop on Synthesis And System Integration of Mixed Information technologies, R4-19, pp.1-6, March 26th, 2018.

松橋功大,古見薫,今井雅,岡本慎太郎,金本俊幾, 里見優太,黒川敦, "モバイル機器向け3D-ICの放熱促進方法," 電気学会 全国大会 講演論文集, March 2018.

葛西孝己, 神藤始, 陳俊, 橋本昌宜, 今井雅, 黒川敦, 金本俊幾, "容量素子最適化のための LSI・パッケージ・ボード電源網解析モデルの構築," 情報処理学会東北支部研究報告 Vol.2017-6 No.B1-1, Feb., 2018

太田拓磨, 宗形恒夫, 今井雅, 黒川敦, 金本俊幾, "PowerMOS デバイス熱設計のためのボンディングワイヤモデルの構築," 情報処理学会東北支部研究報告 Vol.2017-6 No.B1-2, Feb., 2018

成田全, 葛西孝己, 今井雅, 黒川敦, 金本俊幾, "CMOS回路における消費エネルギー低減のための電源電圧と閾値電圧の調節手法," 情報処理学会東北支部研究報告 Vol.2017-6 No.B1-3, Feb., 2018

江良祥耶, 葛西孝己, 今井雅, 黒川敦, 金本俊幾, "FPGA の信号伝搬遅延の温度依存性に関する研究," 情報処理学会東北支部研究報告 Vol.2017-6 No.B1-4, Feb., 2018

豊嶋太樹, 金本俊幾, 黒川敦, 今井雅, "ランダム遅延素子を用いた耐タンパ非同期式回路の設計," 情報処理学会東北支部研究報告 Vol.2017-6 No.B3-1, Feb., 2018

七尾健, 石川雄大, 金本俊幾, 黒川敦, 今井雅, "ビザンチンフォールトトレラントシステムの構築と実用性評価," 情報処理学会東北支部研究報告 Vol.2017-6 No.B3-2, Feb., 2018

2017年

金本俊幾, 葛西孝己, 今井雅, 黒川敦, 橋本昌宜, 陈俊, 神藤始, "容量配置最適化に向けた15nm世代LSI・パッケージ・ボード電源網解析モデルの構築," DAシンポジウム2017論文集, pp.111-114, Aug., 2017

葛西孝己, 今井雅, 黒川敦, 金本俊幾, 陈俊, 橋本昌宜, 神藤始, "容量素子最適化のためのLSI・パッケージ・ボード電源網解析モデルの構築," 平成29年度電気関係学会東北支部連合大会, 2E09, Aug., 2017

太田拓磨, 葛西孝己, 今井雅, 黒川敦, 金本俊幾, 宗形恒夫, "PowerMOSデバイス熱設計のためのボンディングワイヤモデルの構築," 平成29年度電気関係学会東北支部連合大会, 2E03, Aug., 2017

Ryo Sasaki, Toshiki Kanamoto, Masashi Imai, Kaoru Furumi, Atsushi Kurokawa, "Estimating Walking State When Holding Object in Hand by Using Neural Network," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.2B19, Aug., 2017

豊嶋太樹, 金本俊幾, 黒川敦, 今井雅, "ランダム遅延素子を用いた非同期式回路の耐タンパ性向上に関する一考察," 平成29年度電気関係学会東北支部連合大会, 1G04, Aug., 2017

Shintaro Okamoto, Kaoru Furumi, Masashi Imai, Toshiki Kanamoto, Atsushi Kurokawa, "Method for Mitigating Heat of 3D Stacked Memory for Small Electronic Devices," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B17, Aug., 2017

Yuta Satomi, Masasahi Imai, Toshiki Kanamoto, Kaoru Furumi, Atsushi Kurokawa, "Optimizing Power Distribution Network Using Multi-Objective Genetic Algorithm," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B16, Aug., 2017

Kaoru Furumi, Shintaro Okamoto, Toshiki Kanamoto, Masashi Imai, Atsushi Kurokawa, "Reducing Temperature by Relocating 3D IC Structures," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B15, Aug., 2017

Shinichiro Akasaka, Toshiki Kanamoto, Atsushi Kurokawa, Masashi Imai, "A Study on Replica Delay Circuit of Bundled-Data Transfer Asynchronous Circuits," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B10, Aug., 2017

Koutaro Inaba, Toshiki Kanamoto, Atsushi Kurokawa, Masashi Imai, "Hardware Trojan Comparison between Synchronous and Asynchronous Circuits," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B08, Aug., 2017

Ryosuke Hatsuta, Masashi Imai, Toshiki Kanamoto, Shintaro Okamoto, Atsushi Kurokawa, "Thermal-Aware Tile-Based Block Placement for 3D ICs," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B07, Aug., 2017

Seira Kamiie, Toshiki Kanamoto, Masashi Imai, Shintaro Okamoto, Atsushi Kurokawa, "Modeling and Analysis for Predicting Clock Skew of Stacked Chips," Proc. Tohoku-Section Joint Convention of Institutes of Electrical and Information Engineers (IEEE Student Session), p.1B06, Aug., 2017

稲葉光太郎, 金本俊幾, 黒川敦, 今井雅, "非同期式NoCルータへのハードウェアトロイ挿入に関する研究," 電子情報通信学会総合大会 A-7-1, pp.82, Mar., 2017

和島純也, 金本俊幾, 黒川敦, 今井雅, "マルチコアシステムのマルコフモデルによる信頼性評価," 電子情報通信学会総合大会 D-10-3, pp.137, Mar., 2017

増川孔明, 今井雅, 金本俊幾, "多段リングオシレータによるFPGA性能ばらつきの実験的評価," 情報処理学会東北支部研究報告 Vol.2016-6 No.B1-2, Feb., 2017

瀧健太郎, 今井雅, 金本俊幾, "極低電圧回路における消費エネルギー極小化に関する一考察," 情報処理学会東北支部研究報告 Vol.2016-6 No.B1-1, Feb., 2017

田近龍平, 金本俊幾, 今井雅, "低電圧環境における高性能非同期式回路の実現," 情報処理学会東北支部研究報告 Vol.2016-6 No.B1-4, Feb., 2017

石川達也, 金本俊幾, 今井雅, "ハンドシェイク回路多重化による低ノイズ非同期式回路の実現," 情報処理学会東北支部研究報告 Vol.2016-6 No.B1-3, Feb., 2017

2016年

T.Kanamoto, H.Ammo, T.Hasegawa, S.Kobayashi, T.Fukuda, and M.Kawano, "Accurate Prediction of Interconnect Capacitance in Self-Aligned Quadruple Patterning," IEEE 20th Workshop on Signal and Power Integrity (SPI), Turin, 2016, pp. 1-4.

T.Hasegawa, T.Kanamoto, H.Ammo, M.Kawano, T.Fukuda, S.Kobayashi, and A.Kurokawa, "A New EMI-noise reduction method in LSI-package-board system," IEEE 20th Workshop on Signal and Power Integrity (SPI), Turin, 2016, pp. 1-4.

2015年

T.Kanamoto, T.Akamine, H.Ammo, T.Hasegawa, K.Shimizu, Y.Kumano, M. Kawano, and A. Kurokawa,"Structure optimization for timing in nano scale FinFET," IEICE Electronics Express, Vol.12, No.9, pp.1-6, April 2015.

2014年

T.Kanamoto, H. Inaba, T. Chiba, and Y. Ogasahara," Resistivity-based modeling of substrate non-uniformity for low resistivity substrate," IEICE Electronics Express, Vol.11, No.3, pp.1-6, Jan. 2014.

2013年

Y.Ogasahara, M.Hashimoto, T.Kanamoto, and T.Onoye," Supply Noise Suppression by Triple-Well Structure," IEEE Trans. on VLSI Systems, Vol.21, No.4, pp.781-785, April 2013.

2012年

Y.Ogasahara, T.Kanamoto, H.Inaba, and T.Chiba,・ス@"Resistivity-based Modeling of Substrate Non-uniformity for Resistance Extraction of Low-Resistivity Substrate," Proc. of the 17th workshop on Synthesis and System Integration of Mixed Information Technologies, pp.451-456, March 20